rej03g0295-0300 rev.3.00 nov 30, 2007 page 1 of 6 BCR8CM-12LA triac medium power use rej03g0295-0300 rev.3.00 nov 30, 2007 features ? i t (rms) : 8 a ? v drm : 600 v ? i fgti , i rgti , i rgt iii : 30 ma (20 ma) note6 ? non-insulated type ? planar passivation type outline 2, 4 1 3 1. t 1 terminal 2. t 2 terminal 3. gate terminal 4. t 2 terminal 1 2 3 4 renesas package code: prss0004aa-a (package name: to-220) applications contactless ac switch, light dimmer, electronic flasher unit, control of household equipment such as tv sets, stereo systems, refrigerator, washing machine, infrared kotatsu, ca rpet, electric fan, and solenoid driver, small motor control, copying machine, electric tool, elect ric heater control, and other general purpose control applications maximum ratings voltage class parameter symbol 12 unit repetitive peak off-state voltage note1 v drm 600 v non-repetitive peak off-state voltage note1 v dsm 720 v
BCR8CM-12LA rej03g0295-0300 rev.3.00 nov 30, 2007 page 2 of 6 parameter symbol ratings unit conditions rms on-state current i t (rms) 8 a commercial frequency, sine full wave 360 conduction, tc = 105 c note3 surge on-state current i tsm 80 a 60hz sinewave 1 full cycle, peak value, non-repetitive i 2 t for fusing i 2 t 26 a 2 s value corresponding to 1 cycle of half wave 60hz,surge on-state current peak gate power dissipation p gm 5 w average gate power dissipation p g (av) 0.5 w peak gate voltage v gm 10 v peak gate current i gm 2 a junction temperature tj ? 40 to +125 c storage temperature tstg ? 40 to +125 c mass ? 2.0 g typical value notes: 1. gate open. electrical characteristics parameter symbol min. typ. max. unit test conditions repetitive peak off-state current i drm ? ? 2.0 ma tj = 125 c, v drm applied on-state voltage v tm ? ? 1.5 v tc = 25 c, i tm = 12 a, instantaneous measurement v fgt ? ? 1.5 v ? v rgt ? ? 1.5 v gate trigger voltage note2 ?? v rgt ?? ? ? 1.5 v tj = 25 c, v d = 6 v, r l = 6 ? , r g = 330 ? i fgt ? ? 30 note6 ma ? i rgt ? ? 30 note6 ma gate trigger current note2 ?? i rgt ?? ? ? 30 note6 ma tj = 25 c, v d = 6 v, r l = 6 ? , r g = 330 ? gate non-trigger voltage v gd 0.2 ? ? v tj = 125 c, v d = 1/2 v drm thermal resistance r th (j-c) ? ? 2.0 c/w junction to case note3 note4 critical-rate of rise of off-state commutating voltage note5 (dv/dt)c 10 ? ? v/ s tj = 125 c notes: 2. measurement usi ng the gate trigger characteristics measurement circuit. 3. case temperature is measured at the t 2 tab 1.5 mm away from the molded case. 4. the contact thermal resistance r th (c-f) in case of greasing is 1.0c/w. 5. test conditions of the critical-rate of rise of off-state commutating voltage is shown in the table below. 6. high sensitivity (i gt 20 ma) is also available. (i gt item: 1) test conditions commutating voltage and current waveforms (inductive load) 1. junction temperature tj = 125 c 2. rate of decay of on-state commutating current (di/dt)c = ? 4.0 a/ms 3. peak off-state voltage v d = 400 v supply voltage time time time main current main voltage (di/dt)c v d (dv/dt)c
BCR8CM-12LA rej03g0295-0300 rev.3.00 nov 30, 2007 page 3 of 6 performance curves maximum on-state characteristics on-state voltage (v) on-state current (a) rated surge on-state current conduction time (cycles at 60hz) surge on-state current (a) gate characteristics (i, ii and iii) gate current (ma) gate voltage (v) gate trigger voltage vs. junction temperature junction temperature (c) gate trigger voltage (tj = tc) gate trigger voltage (tj = 25c) 100 (%) gate trigger current vs. junction temperature junction temperature (c) gate trigger current (tj = tc) gate trigger current (tj = 25c) 100 (%) maximum transient thermal impedance characteristics (junction to case) conduction time (cycles at 60hz) transient thermal impedance (c/w) 10 0 25710 1 20 30 40 50 60 70 80 90 100 10 310 2 4257 34 0 2.6 1.0 0.6 1.4 1.8 2.2 3.0 3.4 3.8 10 2 7 5 3 2 10 1 7 5 3 2 10 0 7 5 3 2 10 ?1 10 0 23 10 1 5710 2 23 5710 3 23 5710 4 7 5 3 2 10 1 7 5 3 2 7 5 3 2 10 10 2 0.2 0.4 23 10 ?1 5710 0 23 5710 1 23 5 7 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 23 10 2 5710 3 0 10 1 10 3 7 5 3 2 20 10 2 7 5 3 2 60 100 140 4 4 04080 120 10 1 10 3 7 5 3 2 ? 60 ?1 ? 20 20 10 2 7 5 3 2 60 100 140 4 4 ? 40 ? 60 ? 20 ? 40 04080 120 tj = 25c tj = 125c v gd = 0.2v i gm = 2a p gm = 5w p g(av) = 0.5w v gm = 10v v gt = 1.5v i rgt i , i rgt iii i fgt i typical example i rgt iii i rgt i , i fgt i typical example
BCR8CM-12LA rej03g0295-0300 rev.3.00 nov 30, 2007 page 4 of 6 on-state power dissipation (w) rms on-state current (a) maximum on-state power dissipation rms on-state current (a) case temperature (c) allowable case temperature vs. rms on-state current rms on-state current (a) ambient temperature (c) allowable ambient temperature vs. rms on-state current junction temperature (c) repetitive peak off-state current (tj = tc) repetitive peak off-state current (tj = 25c) 100 (%) repetitive peak off-state current vs. junction temperature holding current vs. junction temperature junction temperature (c) holding current (tj = tc) holding current (tj = 25c) 100 (%) 10 68 16 0 2 4 12 14 16 14 12 10 6 8 4 2 0 160 120 100 60 20 0 0 2 40 80 140 468101214 16 0 20 40 60 80 100 120 140 160 02468101214 16 10 2 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 -60 -20 20 60 100 140 -40 0 40 80 120 10 1 10 2 2 3 4 5 7 10 3 2 3 4 5 7 04080120 20 60 100 140 ? 60 ? 20 ? 40 160 120 100 60 20 0 0 40 80 140 1.0 1.5 0.5 2.0 2.5 3.0 rms on-state current (a) ambient temperature (c) allowable ambient temperature vs. rms on-state current 360 conduction resistive, inductive loads curves apply regardless of conduction angle 360 conduction resistive, inductive loads all fins are black painted aluminum and greased 120 120 t2.3 100 100 t2.3 60 60 t2.3 curves apply regardless of conduction angle resistive, inductive loads natural convection typical example typical example natural convection no fins curves apply regardless of conduction angle resistive, inductive loads
BCR8CM-12LA rej03g0295-0300 rev.3.00 nov 30, 2007 page 5 of 6 rate of rise of off-state voltage (v/ s) breakover voltage (dv/dt = xv/ s) breakover voltage (dv/dt = 1v/ s) 100 (%) breakover voltage vs. rate of rise of off-state voltage breakover voltage vs. junction temperature junction temperature (c) breakover voltage (tj = tc) breakover voltage (tj = 25c) 100 (%) commutation characteristics critical rate of rise of off-state commutating voltage (v/ s) rate of decay of on-state commutating current (a/ms) gate trigger current (tw) gate trigger current (dc) 100 (%) gate current pulse width ( s) gate trigger current vs. gate current pulse width test procedure i test procedure iii test procedure ii gate trigger characteristics test circuits latching current (ma) latching current vs. junction temperature junction temperature (c) 10 0 10 1 2 3 5 7 10 2 2 3 5 7 10 3 2 3 5 7 40 80 160 ? 40 0 120 160 100 80 40 20 0 140 40 -40 -60 -20 0 20 60 80 140 100120 60 120 10 1 10 3 7 5 3 2 10 0 23 5710 1 10 2 7 5 3 2 23 5710 2 4 4 4 4 23 10 1 5710 2 23 5710 3 23 5710 4 120 0 20 40 60 80 100 140 160 7 5 3 2 10 0 23 5710 1 10 1 7 7 5 3 2 23 5710 2 10 0 6 ? 6 ? 6 ? 6v 6v 6v 330 ? 330 ? 330 ? a v a v a v t 2 + , g ? typical example distribution t 2 + , g + t 2 ? , g ? typical example typical example i quadrant iii quadrant typical example tj = 125c iii quadrant i quadrant minimum characteristics value typical example tj = 125c i t = 4a = 500 s v d = 200v f = 3hz main voltage main current i t (di/dt)c v d time time (dv/dt)c typical example i fgt i i rgt i i rgt iii
BCR8CM-12LA rej03g0295-0300 rev.3.00 nov 30, 2007 page 6 of 6 package dimensions sc-46 2.0g mass[typ.] ? prss0004aa-a renesas code jeita package code previous code unit: mm 10.5max 4.5 1.3 2.54 2.54 0.8 1.0 3.6 2.6 0.5 4.5max 12.5min 16max 3.8max 7.0 3.2 package name to-220 order code lead form standard packing quantity standard order code standard order code example straight type vinyl sack 100 type name BCR8CM-12LA lead form plastic magazine (tube) 50 type name ? lead forming code BCR8CM-12LA-a8 note : please confirm the specificat ion about the shipping in detail.
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas product s for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of t he use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application ci rcuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attentio n to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the t otal system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding th e suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this do cument or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not desi gned, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of h uman injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion co ntrol, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a r enesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to us e renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, dir ectors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas sha ll have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristic s such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the poss ibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software includin g but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, sinc e the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from r enesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renes as semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7858/7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2377-3473 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 3518-3399 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, m alaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2007. renesas technology corp., all rights reserved. printed in japan. colophon .7.2
|
